PortLeads LTD
Registered in UNITED KINGDOM, Number 13655568,
71-75, Shelton Street, Covent Garden
London, WC2H 9JQ, UNITED KINGDOM
| IMO : 5407277 | Type : Bulk Carrier |
dear with
dear with
telix msg: 3d5ad 19/06/18 12:36 george moundreas & company s.a shipbrokers direct/close owns =================== mv sangita ? 23581 dwt - open 27/30 june in the aegean sea. mv sangita == belize flag class nkk abt 23,581 dwt on 9.518 m draft blt october/1995 saiki, japan loa: 154,38m beam:26.00m depth: 13,35m gt: 14,704 / nt: 7883 4ho/4ha grain capacity: 30,716 cbm bale capacity: 29, 963 cbm gear: 4x30 mt tank top strengh: 15.0 tons/sqm imo no: 9119086 if electro-hydraulic grabs will be used with power supply from vessel then only 3 gangs/cranes to operate simultaneously. if remote controlled grabs will be used without power from vessel then 4 gangs/cranes to operate simultaneously. total weight of cargo and grab maximum up to 20 mts gross weight. cranes outreach bss 26 degrees hoisting angle: no1: 8 mtrs no2,3,4: 9 mtrs hatch size: no1 19.20m x 12,72m no2/no3 20.00m x 17,52m no4 20.80m x 17.52m speed/consumption: ballast: abt 12,5 knts on/abt 16 mtns ifo 380 cst plus aux at sea 0.7 mts mgo (dma or dmz) daily. laden: abt 12.0 knts on/abt 16 mtns ifo 380 cst plus aux at sea 0.7 mts mgo (dma or dmz) daily. aux port idle: 1,5 mts ifo plus 1,20 mgo daily. aux port/gear working: 2.0 mts ifo plus 2 mts mgo daily. ifo & mgo grades: ifo: rmg380 as per iso 8217:2010 or iso 8217:2005 if not available. max sulfur content: 3.50% m/m. the fuel shall comply with the provisions of iso 8217:2010 or 2005 in its entirety (inclusive of specification, forward, tables, annexes and clauses) & the relevant provisions of marpol annex vi reg. 14 and reg. 18. mgo: dma or dmz as per iso 8217:2010 or iso 8217:2005 if not available. max sulfur content: 2,00% m/m. the dma or dmz shall comply with the provisions of iso 8217:2010 or 2005 in its entirety (inclusive of specification, forward, tables, annexes and clauses) & the relevant provisions of marpol annex vi reg. 14 and reg. 18. all above in good weather conditions up to and including bf4 and dss 3 , no adverse current and no negative influence of swell .the vsl entitles to use more diesel at narrow /shallow /traffic waters area, canals, in and out of ports and engine starting/stopping always at masters discretion whenever necessary. also the vessel entitles to burn ls or hs mgo instead of ifo in order to comply with emissions regulations. crew nationality: full syrian all above always about/wog best
dear sir, please find attached copy and advise the same. best
dear purchasing department, i am pleased to introduce our company *ultratech world engineering llc’s* products and services to you as a first step to register ourselves as the approved vendor and to establish business relations with your esteemed organization. *ultratech world engineering llc* based in jebel ali industrial area #1, dubai specializes in *machining / fabrication / hydraulic jobs*. we are engineering solutions provider for *marine, industrial, oilfield, offshore, construction and transport* based customers. since its inception, *ultratech world engineering* *llc* has earned a reputation as *reliable and reasonable* service provider in the region. our esteemed customers are happy to take advantage of a low price & high quality services. our products and services are reasonably priced which assures you value for your money. we look forward for your valuable enquiries. visit our website www.ultratechworld.com for complete details of our activities. you can also call us on our sales support mobile : +971563897999 / +971567712300 *machine shop activities :* - manufacture / machining of ferrous, non-ferrous, alloy steel, stainless steel, high grade steel parts/components as per the drawing/sample. - manufacture of the various items which includes mainly the following components : - - - - - - - - standard class flanges & non-standard flanges, bushes & pins, rods & shafts, couplings, adapters & hydraulic fittings, manifold blocks, control valves, hydraulic cylinders, piston rods & valve plates, high pressure pumps, high pressure tubing, jigs, fixtures & press tools, any other machine’s components. *fabrication shop activities :* - fabrication of ss cabinets & panels. - fabrication of structures. - fabrication of oil tanks - shearing, bending & rolling of steel plates. - bending of steel pipes. - any other activities related with fabrication jobs - on-site installation & erection of the structures, frames & equipment’s. *hydraulic activities :* - design, supply & installation of hydraulic systems. - design, manufacture & supply of hydraulic powerpack & hydraulic cylinders. - high quality repairs, testing & on-site installation of all types of hydraulic / electro hydraulic components viz. hydraulic powerpack, hydraulic pumps, hydraulic motors, hydraulic cylinders, accumulators, winches, , directional control valves, pressure control valves, flow control valves, safety relief valves, counterbalance valves, cargo indicators and other related components of all well known brands which includes boschrexroth , brueninghaus, hydromatic, denison, vickers, eaton, parker, sauer / sundstrand / danfoss, commercial, sun hydraulics, integrated hydraulics, dowty, cross, polyhydron, dynapower, linde , uchida, kawasaki and high torque motors hagglunds , staffa , poclain etc. for marine, offshore, oilfield, industrial, construction & transport industry. - overhaul repair of hydraulic based equipments such as marine cranes, winches, deck equipment, steering gears & variable pitch propeller devices, jacking system of barges, oil drilling rigs & cargo control systems on board. - troubleshooting survey of hydraulic systems and equipments. - supply & installation of hydraulic components such as custom built hydraulic powerpack, hydraulic cylinders, control valves and actuators for hydraulic systems in accordance with the iso standards. - supply of spare parts and components such as hydraulic pumps, motors, control valves, filters and related accessories like tubes, fittings etc. for any hydraulic application. - supply of the hydraulic connections such as hydraulic hose, quick connect fittings, coupling, adaptors etc - fabrication of pipelines, pressure vessels & storage tanks. - on-site installation and pressure testing of pipelines. - cleaning and flushing of hydraulic lines and oil reservoirs. - annual maintenance contract for the hydraulic systems. we look forward to work with you and hope to be the reliable partner for you for all your engineering jobs. please feel free to contact us at the following contact details if you require any additional information. assure you of our best attention and service always. thanks & best
ref : 2395196 19th may 2018 ord: 22349 sub: four moon / gladiator marwan/charles good afternoon, pleased to have your advices on the remittance of our commission please. we are now in dispute with co-brokers who are pressing us to settle their invoice in the interim period plus another project that are busy with on their account as well. pleased to hear. kind
dear flor, pls forward the attached documents to port authority with the following remarks and sign / stamp qte// we hereby confirm the port calculation of freight ton 88.368 for the cargo under b/l no.jfshabu06002 // uqte best
dear ameen, please use attached cro. vessel : cosco singapore voy : 08m0lw1ma eta : 24.06.2018 si/load list cut off : 21.06.2018 0900 hrs ed/gate in cut off : 23.06.2018 1500 hrs terminal 3 note: please be guided not to load any commodity or paints manufactured by national paints as this customer is black listed by cma cgm and anl. if any product noted as manufacturer national paints while submitting shipping instructions the same will not be loaded and de-stuffing has to be arranged under customers cost. note:- - ens filing is mandatory for this shipment - dry containers – free detention for 7 days, free demurrage for 10 days - hazardous containers – free detention for 4 days, free demurrage for 10 days - reefer containers – free detention for 3 days, free demurrage for 5 days - port storage – 10 days free storage for cocs, day one storage applicable for socs - special equipments – free detention for 5 days, free demurrage for 5 days - weighment slip is mandatory for on carriage shipments please provide the same once loading completed or else port vgm weight to be considered as final - please create token well in advance to gate in for all aladdin’s, soc containers to avoid shut out - for imco shipments – ensure to label un placard on the container. - for oog shipments please note below 1. ensure to submit lashing certificate & photographs once stuffing is completed for oog shipment 2. lashing and securing must be in accordance with imo regulations and up to master’s or c/o’s satisfaction 3. the four corners should be available for vertical lifting from the top 4. failure to comply with any of the above may lead to rejection to load the oog cargo “in order to protect the interest of the cargo and the carrier, we remind our customers to ensure containers are checked for cleanliness and sound condition, prior to acceptance from cma cgm for loading.â€
=============================================== liberty shipping services ltd/ handy desk odessa, ukraine 1 chernomorskaya street, suite 2 ph: ++380 482 356695 fax: ++380 482 356696 =============================================== 20 june 2018 good day, direct owners tonnage: - mv alkyoni sb 55,757 dwt jorf lasfar 23-24 june - mv glovis maple 55,705 dwt eta s.braz 2 july - mv ts alpha 38,871 dwt liverpool 22-24 june - mv san sebastian 32,285 dwt marina di carrara 22-23 june +++ mv alkyoni sb jorf lasfar 23-24 june jmu built 2014 / cyprus flag / nkk class dwt 55,757 mt on 12.735 mtrs ssw loa/beam: 190/32.26 grt/nrt:31,538/18,720 grain/bale: 71,800/66,792 ho/ha: 5/5 crane/grab: 4 x 30mt (hook mode)/24 t swl(grab mode) + 4 x 12cbm b/l: abt 14/13.5 k on abt 26 mt ifo eco abt 12.5/12 k on abt 21 mt ifo wog port i/w: 2.5/4.5 mt ifo + 0.2 mt mdo ada +++ mv glovis maple eta s.braz 2 july grd sdbc blt 2013/bahamas flag dwat 55,705 mt on 12.868 m ssw tpc 57.1 grt/nrt : 32,545 / 18,528 loa/beam : 187.88m / 32.26m grain : abt 70,761cbm, bale abt 68,290 cbm cranes : 4 x 30.0 mt swl (hook mode) / 24.0 mt swl (grab mode) grab : 4grabs(14cbm) b/l abt 14.20 kn on abt 33.5/35.5 mt ifo idle/working abt 3.0/4.5 mt ifo per day eco wog b/l abt 12.3/12.1kts on abt 25mt ifo ada +++ mv ts alpha liverpool 22-24 june panama flag – built 2015 – shanhaiguan – sid/bc – log-fitted 38,871 mt dwt on 10.52 m ssw – tpc 51,6 loa: 182.0 m – beam 30m 4 x 36 mt cranes intl. gt/nt: 24,159 / 12,826 grain: 48 759 cbm tanktop strength: 25 mt pr sqm 5 holds / hatches co2 fitted: yes ahl fitted: yes speed/consumption: laden: speed abt 13.50 knots on abt 21.75 mt ifo 380cst + 0,1 mdo ballast: speed abt 14.0 knots on abt 20.50 mt ifo 380cst + 0,1 mdo port idle: abt 3,5 mt ifo + 0,5 mdo port working: abt 5,5 mt ifo + 0,5 mdo eco figures (wog) ballast: abt 12.5 kn on abt 16 mt ifo + abt 0.1 mdo laden: abt 12.5 kn on abt 19.50 mt ifo + abt 0.1 mdo all details about try any +++ mv ‘san sebastian’ marina di carrara 22-23 june liberia flg – blt 2007 (kanda) crnd boxy bulkcarrier 32,285 mt dwt on 10.02 m ssw (tpc 43.84) gt/nt 20,238/10,947 177.13 m loa 28.4 m beam 42,594.3 cbm grn (5792.2/9499.6/9499.6/9499.6/8303.3) 41,124.0 cbm ble (5608/9147/9147/9147/8075) 5hoha: h1:13.6 x 15.8 m,h2-h5:20.8 x 24 m tanktop str: h1-h5: 15 mt 4 x 30.5 mt cranes (outreach beyond ship side 11.8 m) constants excl fw abt 250 mt daily speed/consumption abt 13.30 kn (l) on abt 25.5 ifo 380cst + abt 0.1 mdo abt 14 kn (b) on abt 25.5 ifo 380cst + abt 0.1 mdo portcons idle abt 2.5 ifo + abt 0.5 mdo portcons wrkg abt 3.5 ifo + abt 0.5 mdo all abt/ with kind
telix msg: 3df68 20/06/18 16:06 george moundreas & company s.a shipbrokers excl owns have ================ mv kyriakos - 30k dwt - open chittagong on abt 25/27 june mv kyriakos ----------------------- single deck bulk carrier flag: panama built: 1997, singapore : strengthened for heavy cargoes, hold no. 2 & 4 maybe empty dwt : 29,926 mt on 10.27 m ssw draft (summer) : 29,043.97 mt on 10.056 m draft (winter) : 30,812.00 mt on 10.484 m draft (tropical) : 30,796.72 mt on 10.709 m draft (tropical fresh) loa/beam : 171.45/27.00m gt/ nt : int. 18,675/ 10,979 : suez 19789/16,851.74 : panama ums nt 15605 lightship : 7244.10mt holds/hatches : 5/5 kvaerner folding, hydraulic hatches sizes : no.1, 15.00 x 12.00 m : no 2-5, 18.00 x 15.00 m cargo holds length : no.1 22.35m : no.2 26.25m : no.3 26.25 m : no.4 26.25m : no.5 27.00m cubic grain : 35,023 cbm (untrimmed ends) : 36,768 cbm(trimmed ends) cubic bale : incl. coaming 36580.07cbm : excl coaming 34186.07 cbm grain-holdwise : no.1/2/3/4/5 (trimmed ends) : 5447.8 / 7856.4 / 7907.6 / 7906.5 / 7650.4 : total 36,768.7 gear : 4 x 30 mt cranes outreach from vsl side (hull load) : 8.5m max outreach from centerline : 22m hook travel : 30m luffing time : 46 sec voltage : ac440v/60hz/3ph grabs : not fitted tank top strength : 22 mt tank top dimensions : length / width forward/aft (m) no.1, 20.80 / 4.60 / 15.50 no.2, 22.40 / 17.60 / 21.10 no.3, 22.40 / 21.10 / 21.10 no.4, 22.40 / 21.10 / 21.10 no.5, 24.60 / 21.10 / 7.60 hoppers : only on holds sides tpc : loaded 41.23 light 33.85 fwa : 225 mm constants excl fw/ unpumpable ballast/ oil: abt 300 mt tank capacity ifo (98% full) : 1196 cbm (excl. settling/service tanks) if lsfo is required then one db storage ta nk of 233 cbm can be dedicated for this purpose. mdo (98% full) : 75 cbm (incl. settling/service) plus 41 cbm for ls fresh water : 491 cbm co2 fitted in holds : yes awwf ladders fitted : yes distance fm waterline to top of hatch cover: 11.80m in normal ballast condition distance fm waterline to top of hatch cover in heavy ballast condition is 9.5m. distance fm keel to highest point : 39.60m distance fm keel to top of hatch coaming: 16.80m speed/consumption underway (figures are about): laden 13 kt on 22.5 mt ifo 380 cst + 1.7 mt for aes + 0.5 mt mdo per day ballast 13 kt on 21.5mt ifo 380 cst + 1.7 mt for aes + 0.5 mt mdo per day port consumption: idle 1.5 mt ifo 380 cst + 1 mt for boiler + 0.5 mt mdo gear working/ballasting/deballasting 2.5 mt ifo 380 cst + 1 mt for boiler + 0.5 mt mdo laden at eco speed: 110 rpm, 12 kt on 17 mt ifo 380 cst + 1.7 mt for aes + 0.5 mt mdo per day 100 rpm, 10 kt on 14.5 mt ifo 380 cst + 1.7 mt for aes + 0.5 mt mdo per day ballast at eco speed: 110 rpm, 12kt on 17 mt ifo 380 cst + 1.7 mt for aes + 0.5 mt mdo per day 100 rpm, 10 kt on 14.5 mt ifo 380 cst + 1.7 mt for aes + 0.5 mt mdo per day all above in fair weather up to bf 4 and douglas sea state 3 about corresponds to -0.5 kt on the speed and +5% on the consumption figures but ecos wog. vessel to carry a minimum quantity of 30mt mdo, and to have the liberty to use mdo while maneuvering in shallow/narrow waters, canals, rivers, in/out of ports and during poor visibility/emergency. sufficient lsdo to be provided when trading in areas where lsfo
| Name | OVI |
|---|---|
| IMO | 5407277 |
| Ship Owner / Manager | |
| Ship Master | |
| MMSI | |
| Type | Bulk Carrier |
| Flag | Sierra Leone |
| DWT | 27362 |
| GT | 17873 |
| NT | |
| LOA | 222 |
| Draught | 8.15 |
| ETA | |
| Destination | |
| Latitude / Longitude | / |
| Speed | 0kn |
| Call Sign | |
| Last Update | |
| Vessel Particulars | Click Here |
| Vessel Certificates | Click Here |
Top Top
Let's Speak
PortNext is your ultimate solution to find vessel next ports and stay ahead of your competitors.
Be a step ahead with the vessel arrival information
Empower your business with data driven decision-making with 100% accurate vessel data
Offer ship operators, owners and managers with your proactive approach to vessel pre-arrival services
Improved Planning and Resource Allocation
Reduced dwell time in port by ensuring faster turnaround
Risk Mitigation
Worldwide Agency Network
Access To More Than 100 Countries Globally
Men On The Ground
Real Time Information
Data Drivern Organization
Innovative Technology With US Patent Application
Thank You For Your Request. Our Team Will Contact You Shortly.
PortLeads is an AI based business intelligence platform, backed up with a US patent application technology with a revolutionary freight calculator for more than 100 countries globally and other unique online services used by 1 Million shipping users every year including cargo owners, ship owners, ship managers, ship operators, brokers, land transporters, clearing agents, ship agents & other maritime companies to achieve long-term business relationship through direct connection with intended counterpart Read More
© 2023 PortLeads LTD
Registered in London, United Kingdom, Number 13655568
71-75, Shelton Street, Covent Garden, London, WC2H 9JQ, United Kingdom
M : +447586995382
All rights reserved | Powered by PortLeads LTD
Login / Sign Up
